Through-beam ultrasonic barrier UBE800-F77-SE2-V31
- Miniature design
- Highly visible LEDs for Power ON and switching state
- High switching frequency
- Program input
- Degree of protection IP67
Datasheet excerpt: Technical data of UBE800-F77-SE2-V31
Product Description | ||
---|---|---|
Through-beam ultrasonic barrier |
General specifications | ||
---|---|---|
Sensing range | 0 … 800 mm emitter/receiver spacing | |
Standard target plate | see table | |
Transducer frequency | approx. 300 kHz | |
Indicators/operating means | ||
LED green | Power on ( emitter ) | |
LED yellow | switching state ( receiver ) | |
Electrical specifications | ||
Operating voltage | 20 … 30 V DC , ripple 10 %SS ; 12 … 20 V DC sensitivity reduced to 80 % | |
No-load supply current | ≤ 20 mA | |
Input | ||
Input type | 1 program input (receiver) | |
Input impedance | 16 kΩ | |
Pulse length | ≥ 3 s | |
Output | ||
Output type | 1 switch output PNP, NO | |
Rated operating current | 200 mA , short-circuit/overload protected | |
Voltage drop | ≤ 2 V | |
Switch-on delay | ≤ 5 ms | |
Switching frequency | 100 Hz | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
Mechanical specifications | ||
Connection type | M8 x 1 connector , 4-pin | |
Degree of protection | IP67 | |
Material | ||
Housing | Polycarbonate | |
Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
Mass | Per 10 g | |
Tightening torque, fastening screws | max. 0.2 Nm |